Branch: Piqua Hardware & Rentals, Piqua
0 $0.00
items in your cartto quote To cart
Ooops no items were found.
Try something else.
Ok
Loading…
0
WW Henry

Henry 549 FeatherFinish Underlayment Patch & Skimcoat, 7 Lb.

Category Installation & Accessories
274399 274399
274399 274399
Starting from
$24.49 / EACH
/
LIST PRICE $24.49
%
- +
Check stock in other branches
Your Pick Up branch is Piqua Hardware & Rentals, Piqua
Add to quick list
Compare
WW Henry

Henry 549 FeatherFinish Underlayment Patch & Skimcoat, 7 Lb.

Item Code: 274399
A Portland cement-based patch and skim coat that can be installed over almost any surface to provide a smooth and permanent finish prior to the installation of floor coverings or patching holes, gouges, cracks, and seams, in subfloors such as concrete, brick, masonry, terrazzo and ceramic tile, wood, and metal, prior to the installation of any floor covering. Specially formulated with an ultra fast dry time. Dries in as little as 15 minutes. Can be installed from a feather edge to 5 In. depth. No primers or additives needed, just mix with water. Recommended mixing ratio is 2 parts powder to 1 part water (by volume). For the entire bag, mix 1.75 quarts of water with the 7 Lb. bag. Coverage: Trowel with flat edge, 7 Lb. box covers approximately 198 Sq. Ft. at skim coat. Temperature should be above 65 deg. F. Remove dirt, wax, polish, paint, and other foreign material from floor prior to application. Mixing product with a 1/2 In. drill at a minimum 650 RPM will produce a creamier and easier-to-apply mix. If the product begins to harden in the bucket use a drill to re-whip. Will not promote the growth of mold and/or mildew. 7 Lb. box.
Category Installation & Accessories
warning sign WARNING
This product contains a chemical or chemicals known to the State of California to cause cancer andor reproductivedevelopmental effects.
A Portland cement-based patch and skim coat that can be installed over almost any surface to provide a smooth and permanent finish prior to the installation of floor coverings or patching holes, gouges, cracks, and seams, in subfloors such as concrete, brick, masonry, terrazzo and ceramic tile, wood, and metal, prior to the installation of any floor covering. Specially formulated with an ultra fast dry time. Dries in as little as 15 minutes. Can be installed from a feather edge to 5 In. depth. No primers or additives needed, just mix with water. Recommended mixing ratio is 2 parts powder to 1 part water (by volume). For the entire bag, mix 1.75 quarts of water with the 7 Lb. bag. Coverage: Trowel with flat edge, 7 Lb. box covers approximately 198 Sq. Ft. at skim coat. Temperature should be above 65 deg. F. Remove dirt, wax, polish, paint, and other foreign material from floor prior to application. Mixing product with a 1/2 In. drill at a minimum 650 RPM will produce a creamier and easier-to-apply mix. If the product begins to harden in the bucket use a drill to re-whip. Will not promote the growth of mold and/or mildew. 7 Lb. box.

Specifications

Shipping Weight

7.43lb

Height

9.05in

Width

5.8in

Length

4.85in

Approx. Coverage

24 Sq. Ft.

Base Material

Portland Cement

Brand

WW Henry

Category

Floor Patch & Leveler

Clean-Up

Water

Color

Gray

Container Size

7 lb.

Dry Time

15 Mins.

Interior/Exterior

Interior

Shelf Life

1 Yr.

A Portland cement-based patch and skim coat that can be installed over almost any surface to provide a smooth and permanent finish prior to the installation of floor coverings or patching holes, gouges, cracks, and seams, in subfloors such as concrete, brick, masonry, terrazzo and ceramic tile, wood, and metal, prior to the installation of any floor covering. Specially formulated with an ultra fast dry time. Dries in as little as 15 minutes. Can be installed from a feather edge to 5 In. depth. No primers or additives needed, just mix with water. Recommended mixing ratio is 2 parts powder to 1 part water (by volume). For the entire bag, mix 1.75 quarts of water with the 7 Lb. bag. Coverage: Trowel with flat edge, 7 Lb. box covers approximately 198 Sq. Ft. at skim coat. Temperature should be above 65 deg. F. Remove dirt, wax, polish, paint, and other foreign material from floor prior to application. Mixing product with a 1/2 In. drill at a minimum 650 RPM will produce a creamier and easier-to-apply mix. If the product begins to harden in the bucket use a drill to re-whip. Will not promote the growth of mold and/or mildew. 7 Lb. box.

Specifications

Shipping Weight

7.43lb

Height

9.05in

Width

5.8in

Length

4.85in

Approx. Coverage

24 Sq. Ft.

Base Material

Portland Cement

Brand

WW Henry

Category

Floor Patch & Leveler

Clean-Up

Water

Color

Gray

Container Size

7 lb.

Dry Time

15 Mins.

Interior/Exterior

Interior

Shelf Life

1 Yr.

SEARCH ×